Does anyone own a DEI 450t?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3896
Printed Date: July 14, 2025 at 10:37 PM

Topic: Does anyone own a DEI 450t?

Posted By: cpgoose
Subject: Does anyone own a DEI 450t?
Date Posted: September 23, 2002 at 2:17 PM

Just curious if anyone owns a DEI 450t channel expander?

Just looking for some comments on it, how it works, stuff like that. Does it come with another remote you have to use, or can you use your existing remote for the extra channels? I'm assuming you'll have to hold down a button (like a SHIFT button) to access the other channels?

Thanks for any info/comments/suggestions.

Replies:

Posted By: slugger
Date Posted: September 23, 2002 at 4:33 PM

In order to use this, The system you want to hook it to must have a validity output, a delayed validity output will not work. To create channel 1, hold down the button that creates a validity output for 2 seconds. Channel 2 , press button once, release, and then hold for 2 seconds. Channel 3, press button twice, then hold down for 2 seconds, and so on for I think 6 channels . All channels are programmable as well. Works great for operating multiple sliders, etc, but if using all 6 channels it might become complicated.

Duane

Posted By: cpgoose
Date Posted: September 24, 2002 at 7:38 AM

Man, and I thought it would be annoying to have to use a "shift" button, but this is even more complicated. That's a lot of steps just to activate a channel...especially like 5 or 6.