Camaro Baypass
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38974
Printed Date: May 12, 2025 at 8:46 PM
Topic: Camaro Baypass
Posted By: The Rock
Subject: Camaro Baypass
Date Posted: September 11, 2004 at 10:39 AM
Replies:
Posted By: tbirdman74
Date Posted: September 11, 2004 at 11:58 AM
If you are working on a GM vehicle with a resistor in the key you will need to follow these instructions. With a digital multimeter measure the resistance across the resistor in the key, you will receive one of the following resistance’s: 392, 523, 681, 887, 1.13K, 1.47K, 1.87K, 3.01K, 3.74K, 4.75K, 6.04K, 7.5K, 9.53K, 11.8K. Purchase a resistor with a value within 5% of the measured value and a 30 amp BOSCH style relay and follow the diagram below.
Where it refers to the wht/blk Ign. 3 disregard that color. Use what ever extra ign output you have from alarm, or output during runtime.The sleeve that contains the V.A.T.S wires will be ORANGE, GREY or BLACK.
Hope this helps you out.
Remember the Heroes. Let's Roll.
-------------
If it don't fit, Force it.
If it breaks, You needed a new one anyway!