Print Page | Close Window

Clifford 800IQ brain onto 700IQ wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39058
Printed Date: May 17, 2025 at 6:27 PM


Topic: Clifford 800IQ brain onto 700IQ wiring

Posted By: MestizoRacer310
Subject: Clifford 800IQ brain onto 700IQ wiring
Date Posted: September 13, 2004 at 12:27 AM

Would this work? I found an 800IQ brain cheap......

-------------
Kevin
'02 Acura TL Type S & '98 Accord EX-L Sedan



Replies:

Posted By: Teken
Date Posted: September 13, 2004 at 7:18 PM
https://www.directechs.com/guides/manuals/ig/clifford/intelliguard7000_install.pdf


https://www.directechs.com/guides/manuals/ig/clifford/intelliguard8000_install.pdf

Perhaps this will help you out a little bit.

Regards

EVIL Teken . . .



Posted By: cosmoworks
Date Posted: September 13, 2004 at 8:31 PM
If you're wondering if the 700IQ harness will plug directly into an 800IQ harness then the answer is no - it wont work.

IG700IQ uses a single 24 pin connector and the IG800IQ uses one 14 pin connector and one 18 pin connector.



Posted By: its_radio_shop
Date Posted: September 15, 2004 at 9:57 AM
Also if memory serves me, the 700IQ uses a hard mounted antenna so you may need to come up with an 800IQ antenna with the "F" connector. Or make your own.


Print Page | Close Window