Cflifford Concept 600 Fitting Location

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39083
Printed Date: May 19, 2025 at 3:09 AM

Topic: Cflifford Concept 600 Fitting Location

Posted By: Technodude
Subject: Cflifford Concept 600 Fitting Location
Date Posted: September 13, 2004 at 3:33 PM

Hi, I am in the process of fitting a Clifford Concept 600 alarm to my phase 1 Peugeot 306. The problem is that I cannot find a location to fit the control box, no space under the dashboard. Can anybody tell me to location in your 306's if you know.
The control box is 180mm x 150mm x 45mm.
I have tried behind the headunit, can't get it in. No room behind the glove box either.

Thanks in advance.

Replies:

Posted By: naughtydog
Date Posted: September 13, 2004 at 5:28 PM

Under the drivers seat is an option - the Clifford looms do tend to be a bit on the short side for my liking...so you may have to extend a few wires

Naughty

Print Page | Close Window