Garage door open with Alarm Aux Output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39152
Printed Date: May 03, 2024 at 11:33 PM

Topic: Garage door open with Alarm Aux Output

Posted By: robb420in323
Subject: Garage door open with Alarm Aux Output
Date Posted: September 14, 2004 at 8:51 PM

I wanted to activate my Locks,ALarm and Garage door with one remote.

So I Ran a relay to one of my Alarms Outputs. The relay was negative trigerd with a 12volt source. So now the relay is a Open\Close switch. Activated by remote

I disassembled the Garage door opener. And Modified the button By coiling its Pins with Wire strand and solder.. Which left the door opener always ON.
Then Interuped the Battery Contacts with half a foot of 16G Wire. Cut the wire and wire it to the relay. Screw the relay onto the GD opener mount to Dash frame

-------------
Hunter S. Thompson for sheriff

Replies:

Posted By: mo12v
Date Posted: October 02, 2004 at 5:15 PM

I just use a Single Channel Receiver in the garage that picks up my Remote
$ 12.95

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: robb420in323
Date Posted: October 07, 2004 at 12:34 PM

my mod only cost me 1 relay and a garage door opener. everyone in the house has one.

The Garage door opening units are 10bucks.

and the relay was only 2 b`ucks

-------------
Hunter S. Thompson for sheriff

Posted By: SEXIFIED
Date Posted: October 19, 2004 at 6:21 PM

how 'bout putting a small chain on the garage door opener and gluing your remote to the top of it?

ha,ha,ha just thought i would throw that in there.

-------------
SWEET.