Print Page | Close Window

programming extra remote for 791vx

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39235
Printed Date: July 06, 2025 at 11:07 AM


Topic: programming extra remote for 791vx

Posted By: wblakes
Subject: programming extra remote for 791vx
Date Posted: September 16, 2004 at 2:21 PM

can someone show me how to program an extra remote for 791vx? i lost all the manuals to the alarm. thanks



Replies:

Posted By: Teken
Date Posted: September 16, 2004 at 4:14 PM
https://www.directechs.com/guides/manuals/ig/viper/N564V_6-03.pdf

Regards

EVIL Teken . . .



Posted By: Teken
Date Posted: September 16, 2004 at 4:17 PM
https://www.directed.com/guides/manuals/og/viper/G564V_6-03.pdf



Posted By: xtremeaudio
Date Posted: September 18, 2004 at 3:48 AM

Try this. This is the procedure for a replacement transmitter / remote.

1. Open a door

2. Turn Ignition key to on position.

3. Within 5 seconds press the Valet / Program button twice. On the second push hold it. The LED will flash once and the siren will chirp once.

4. Do not release the Valet / program button yet. While holding the Valet / Program button press the lock button on your remote transmitter. The siren should chirp once. This last chirp confirms the unit has learned the remote transmitter.

5. Release the Valet / Program button and then turn off and remove ignition key.

Hope this works for you


Print Page | Close Window