Print Page | Close Window

viper 600 esp door lock question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39263
Printed Date: July 12, 2025 at 3:12 PM


Topic: viper 600 esp door lock question

Posted By: Brianmahon
Subject: viper 600 esp door lock question
Date Posted: September 17, 2004 at 3:05 AM

I am currently installing a Viper 600 ESP into a 97 honda civic ex.  According to the manual this alarm has built in door lock relays.  I found the correct wires for the door lock/unlock using the wiring diagrams that i found on this site, I also tested them with a probe.  My question is which wires on the 600 esp trigger the door lock and door unlock.  From what i can tell it's blue/black for unlock and GREEN/ black for lock.  When I hook up these wires nothing happens.  Also when i probe these wires while arming and disarming the alarm I get no signal and if I'm not mistaken those wires should throw a ground signal when armed/disarmed.  I'm starting to think maybe the brain is just broken.  any input would be helpful.

Brian




Replies:

Posted By: circus boy
Date Posted: September 17, 2004 at 7:13 AM
the brain is not broken, you just need to hook up the purple or purple balck wire<on the same harrness as the door locks> to ground




Posted By: Brianmahon
Date Posted: September 17, 2004 at 1:26 PM
Damn, I suck.  Thanks man.





Print Page | Close Window