Print Page | Close Window

DEI Bitwriter Data Port Question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39270
Printed Date: June 04, 2024 at 5:56 PM


Topic: DEI Bitwriter Data Port Question

Posted By: jmr964
Subject: DEI Bitwriter Data Port Question
Date Posted: September 17, 2004 at 10:19 AM

Can mulitple accessories be hooked up through the data port on a DEI alarm/remote start.  For instance having a 820M module and say a 103T module (this is just for example).  I am curious if anyone has done anything like this?  If you have, did you splice the two units together or did you have to diode isolate them and did it even work ??

Jason




Replies:

Posted By: kgerry
Date Posted: September 17, 2004 at 11:31 AM
as far as i know the Bitwriter port can only be used for the Bitwrier, unless you are using this ESP2 port to interface with their video products.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979


Print Page | Close Window