install guide for Clifford IG7000
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39311
Printed Date: July 07, 2025 at 10:25 PM
Topic: install guide for Clifford IG7000
Posted By: CutlassThunder
Subject: install guide for Clifford IG7000
Date Posted: September 18, 2004 at 1:28 AM
I was wondering if someone could help me find an install guide a a Clifford Intelligaurd 7000, I actually have a install guide that is supposed to be for this alarm, and it gives me a general idea and I've hooked up about 85% of the wires up using it, but still in the manual I have it shows some wires in one place that are actually in a differnt place on my alarm it shows a 9-pin connector when mine has a 12, and stuff like that so can anyone can help me out?
Replies:
Posted By: Teken
Date Posted: September 18, 2004 at 10:06 AM
Posted By: CutlassThunder
Date Posted: September 18, 2004 at 10:23 AM
Yea that is the same instructions that I have. notice in those instructions it shows a 4 pin connector and on my alarm it is a 12 pin connector, I have manage to connect about 8 or 9 of the 12 wires utillizing both the instructions for the alarm and for the Intellistart IV, but I also have a harness not even mentioned in the instruction at all I have that 24 pin harness that is shown in the in struction then another 10 or 12 pin harness that plugs on the same side. I will try to post pictures A.S.A.P.
Posted By: Teken
Date Posted: September 18, 2004 at 10:46 AM
https://www.directechs.com/techtips/pdfs/resources/security/clifford_techtips/49000313.pdf
There are a few more reference materials available. If I can locate it on my Master Security Disc I will place the link here, via PDF format.
Regards
EVIL Teken . . .
Posted By: CutlassThunder
Date Posted: September 18, 2004 at 12:21 PM
Actually its an Intelligaurd Millennia not IG7000 if there is a difference...
Posted By: CutlassThunder
Date Posted: September 18, 2004 at 12:41 PM
I have the pictures but not sure on how to get the mon here
Posted By: Teken
Date Posted: September 18, 2004 at 1:01 PM
Posted By: CutlassThunder
Date Posted: September 19, 2004 at 10:56 AM
thanks for all the help thats just what I needed
Posted By: Teken
Date Posted: September 19, 2004 at 11:09 AM
You know you really had me going there for awhile. Because I couldnt for the life of me understand how you had two different wiring harnesses. 
Glad it worked out.
Regards
EVIL Teken . . .
|