I'm new to this forum and I need some assistance with installing the roll-up window module. I think is a good way to learn about a car if you have more hand on experience. I went thru the forum in regards to installing this module and alot of people mention is not that hard to install. So I decided to do it.
I went to ebay and purchased a Power Window Control Module. Here's the link of the product. https://cgi.ebay.com/dll?ViewItem&category=14934&item=5720546470&rd=1
I have a 1996 Nissan Maxima GLE and I need to know where to put the module. I don't think is that effective to install module on the door. I have printed the Haynes and the12volts wire layout of the car. I think is the best to put the module next the Master control system.
I have no clue where all the wires are located? I'm guess, is located behind the HU of the stereo system. I have opened up the HU to install the CD Changer, but there's so much wires. I don't know which one goes to the driver or passenger door. If anyone here would assist me or tell me where the wires are located. I would really appreicate it. Thank you
On the module, there's a couple of wires i'm not sure where it goes to
Pink= To Acessory Item?
Orange= 500ma. Activation?
orange need to hook your alarm .when alarm i arm will send out (-) and will roll up your window
pink you can hook up to any need (-) when alarm is arm
window roll up box the best i thing you can put in door next to master swith