Need help to uninstall alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39497
Printed Date: May 10, 2025 at 2:40 PM

Topic: Need help to uninstall alarm

Posted By: thousandandone
Subject: Need help to uninstall alarm
Date Posted: September 21, 2004 at 5:47 PM

Hi, I'm very new to this field. I have a Legend 91 which has a Viper with 552V on it. The remote control has only 2 bottom ( I & II ). When I press II it will lock/unlock. However sometimes it keep horn when I open door. The starter not working at all. Now I want to install the Compustar 2way FM. What is the best to remove the old module?

Thanks in advance

-------------
Autostar

Replies:

Posted By: raydawg357
Date Posted: September 22, 2004 at 10:09 AM

There should be only one wire that is cut and that's your starter wire. Unplug the wiring harnesses from the brains of the alarm and reconnect the starter wire to itself.

-------------
Do it right the first time

Print Page | Close Window