Doorlock help with 2000 galant
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39580
Printed Date: July 23, 2025 at 8:58 PM
Topic: Doorlock help with 2000 galant
Posted By: downsouthplaya
Subject: Doorlock help with 2000 galant
Date Posted: September 22, 2004 at 8:09 PM
I installed a Clifford RS 3.5 in a 2000 galant, i found my doorlock wires which are negative trigger, the alarm has a 3 pin harness with a blue, red, and green wires. Red isnt used, the blue wires when i touch the wires activates both lock and unlock, but when i hook them up to the wires they dont do anything. The vehicle also has factory keyless entry, please help.
Replies:
Posted By: mo12v
Date Posted: September 22, 2004 at 8:21 PM
U may need relays to supply better Ground Pulse. | Power Lock | VIOLET ( - ) | DRIVERS KICK | | Power Unlock | GREEN/ RED ( - ) | PANEL |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: swamprat323
Date Posted: September 22, 2004 at 8:24 PM
POWER LOCK|purple |- |either kick panel or *1 |
| POWER UNLOCK|lt. GREEN/ red |- |either kick panel or *1
*1 The door lock wires are in a black plug behind the fuse box, above a green module.
Are these the wires you are using.
Posted By: downsouthplaya
Date Posted: September 22, 2004 at 8:29 PM
swamprat323 wrote:
POWER LOCK|purple |- |either kick panel or *1 |
| POWER UNLOCK|lt. GREEN/ red |- |either kick panel or *1
*1 The door lock wires are in a black plug behind the fuse box, above a green module.
Are these the wires you are using.
im using the ones in the kick panel, with a test light to ground when i hit the wires they lock and unlock fine, but when wired to the alarm they dont do anything.
Posted By: swamprat323
Date Posted: September 22, 2004 at 8:43 PM
Use relays like mo12v said. See what happens
Posted By: downsouthplaya
Date Posted: September 22, 2004 at 8:45 PM
how would i wire them in?
Posted By: mo12v
Date Posted: September 22, 2004 at 8:59 PM
2 SPDT Relays: LOCK:
Pin 87 to Ground
Pin 30 to Lock
Pin 85 to Negative Lock Output from Keyless
Pin 86 to 12 volt +
Pin 87a NOT Used UNLOCK:
Pin 87 to Ground
Pin 30 to Unlock
Pin 85 to Negative Unlock Output From Keyless
Pin 86 to 12 volt +
Pin 87a NOT Used ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mo12v
Date Posted: September 22, 2004 at 9:00 PM
P.S .......That is if U don't have pre-wired Relay sockets
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: downsouthplaya
Date Posted: September 22, 2004 at 9:03 PM
mo12v] wrote:
p>2 SPDT Relays:LOCK:
Pin 87 to Ground
Pin 30 to Lock
Pin 85 to Negative Lock Output from Keyless
Pin 86 to 12 volt +
Pin 87a NOT Used UNLOCK:
Pin 87 to Ground
Pin 30 to Unlock
Pin 85 to Negative Unlock Output From Keyless
Pin 86 to 12 volt +
Pin 87a NOT Used
the lock outputs from keyless are the wires in kickpanel right?
Posted By: mo12v
Date Posted: September 22, 2004 at 9:07 PM
( the alarm has a 3 pin harness with a blue, red, and green wires. Red isnt used, the blue wires when i touch the wires activates both lock and unlock, but when i hook them up to the wires they dont do anything.)
BLUE would be Unlock Pin 85 2nd Relay
GREEN would be Lock Pin 85 1st Relay
Red would be for Pin 86 on both Relays ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: downsouthplaya
Date Posted: September 22, 2004 at 9:08 PM
mo12v] wrote:
p>( the alarm has a 3 pin harness with a blue, red, and green wires. Red isnt used, the blue wires when i touch the wires activates both lock and unlock, but when i hook them up to the wires they dont do anything.)
BLUE would be Unlock Pin 85 2nd Relay
GREEN would be Lock Pin 85 1st Relay
Red would be for Pin 86 on both Relays
then pin 30 is the factory doorlock wires, got it, thanks why couldnt every doorlock system just be positive
Posted By: mo12v
Date Posted: September 23, 2004 at 7:52 AM
Don't forget to have a good ground on Pin 87
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
|