91 Legend Trunk Release

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39787
Printed Date: May 29, 2024 at 12:19 AM

Topic: 91 Legend Trunk Release

Posted By: thousandandone
Subject: 91 Legend Trunk Release
Date Posted: September 26, 2004 at 5:19 PM

Hi, I couldn't find the trunk release wire. I try the WHITE/ blue but it not the right one

Need help please

Thank You

-------------
Autostar

Replies:

Posted By: mo12v
Date Posted: September 26, 2004 at 5:26 PM

I beleive it is:

Trunk Release

WHITE/ BLACK (+)

AT RELEASE SWITCH

Positive Pulse Trunk Release

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Teken
Date Posted: September 26, 2004 at 5:26 PM

Trunk Release: WHITE/ BLACK/ GOLD DOTS This is a (+) positive system. It may be located at the DRIVER'S KICK panel.

This information pertain to the sedan.

Regards

EVIL Teken . . .

Posted By: thousandandone
Date Posted: September 26, 2004 at 6:12 PM

Hi,

I found a WHITE/ BLACK/ Silver Dot. I'm not sure this is the one. I have the Compustar CM3000 for the trunk release it says:

(-) 200mA Trunk release . My car is positive system. in this case, How can I trigger it ?

Thank You

I going to find WHITE/ BLACK/ GOLD DOTS right now

-------------
Autostar

Posted By: Teken
Date Posted: September 26, 2004 at 6:27 PM

86 - 87 fused at 10 amperes to a +12 volts source

85 - (-) 200mA trunk release

30 - To trunk wire (WHT/BLK/ Gold dots

Please bare in mind it is up to you to varify *each* wire to ensure they are correct.

Regards

EVIL Teken . . .

Posted By: hagmanti
Date Posted: September 26, 2004 at 9:01 PM

thousandandone wrote:

I found a WHITE/ BLACK/ Silver Dot. I'm not sure this is the one.

What Teken said, but also-- put a DMM across that wire and ground, measuring voltage. Make sure that when you press the trunk release button, it spikes to 12V briefly.

Teken is right-- you must always verify...

Me

Print Page | Close Window