2005 Toyota Camry alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39826
Printed Date: November 04, 2025 at 9:22 AM
Topic: 2005 Toyota Camry alarm/remote start
Posted By: DOHOA
Subject: 2005 Toyota Camry alarm/remote start
Date Posted: September 27, 2004 at 7:16 AM
I am going to work on 2005 Toyota Camry 04 cyl.with alarm and remote start, I know the wiring diagram has not changed from 2004.? (not sure) I need the diagram and the key sense to disarm the factory alarm. Thank you
Replies:
Posted By: raydawg357
Date Posted: September 27, 2004 at 8:21 AM
Posted By: DOHOA
Date Posted: September 27, 2004 at 9:34 AM
Thank You for your helping . Do you thing 2005 Camry 04 Cyl. is equiped transponder?.
Posted By: Velocity Motors
Date Posted: September 27, 2004 at 9:53 AM
The '05 Camry does have an Immobilizer chip. Must use a universal bypass module for this vehicle as there is no keyless version available yet.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: meh66
Date Posted: October 25, 2004 at 8:29 AM
raydawg357, Do you have the directed link for a 2003 Camry? ------------- MEH66
"Car Performance and Mobile Electronic Enthusiats"
Posted By: mo12v
Date Posted: October 25, 2004 at 8:49 AM
OMEGA # PKT is keyless Transponder
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: raydawg357
Date Posted: October 25, 2004 at 9:17 AM
Posted By: meh66
Date Posted: October 25, 2004 at 11:35 AM
thanks.....raydawg357
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
Posted By: meh66
Date Posted: October 25, 2004 at 1:45 PM
I have another question concerning the 2003. Where the data wires needed for the transponder located? Do you have to remove the steering column cover or are they in the ignition harness? ------------- MEH66
"Car Performance and Mobile Electronic Enthusiats"
Posted By: raydawg357
Date Posted: October 25, 2004 at 1:48 PM
They are in the steering column, in a plug that plugs into the key cylinder.
-------------
Do it right the first time
Posted By: meh66
Date Posted: October 25, 2004 at 1:57 PM
Thanks again, I was hoping I did not have to remove the cover as I heard two screws are very hard to get to.
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
Posted By: raydawg357
Date Posted: October 25, 2004 at 2:02 PM
Actually, you will have remove the cover and those screws aren't hard to get to at all. There's three screws to remove and the top will seperate from the bottom.
-------------
Do it right the first time
|