Where do you place kill relays?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39858
Printed Date: July 22, 2025 at 3:12 AM

Topic: Where do you place kill relays?

Posted By: vancouverbc
Subject: Where do you place kill relays?
Date Posted: September 27, 2004 at 6:17 PM

Do thieves have the time to open hood to find relays? Is a hood lock effective?

Is there anywhere to put relays where thief can't access? eg inside starter motor unit. I want to interrupt the starter wire and fuel wire.

-------------
1991 240sx
alarm=model 2620.web central door locking system

Replies:

Posted By: draasch
Date Posted: September 28, 2004 at 7:58 PM

just get creative....hide your wires well........try to make everything look factory................

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: shesaidshewas18
Date Posted: September 29, 2004 at 3:57 PM

Try getting some wire the gauge are your starter wires. Then solder the new wires in with the starter wire. With the new wires, extend and cut it to the length you desired. Then place the relay anywhere you want, and like draasch said, hide your wires well, and try to make everything look factory. Just an idea...

Posted By: dfiddy
Date Posted: September 29, 2004 at 9:45 PM

Wait I'll take a picture of where I usually hide them and then email it to you including my address...sound good? Just being a smart ass. Just do like everyone said, just get creative and have some fun with it. You'll end up surprising yourself, i have many a time. =)

Print Page | Close Window