automate am1 427A installation guide

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39899
Printed Date: June 01, 2024 at 6:04 PM

Topic: automate am1 427A installation guide

Posted By: osbaldo
Subject: automate am1 427A installation guide
Date Posted: September 28, 2004 at 8:35 AM

Hi. I need a link or installation instructions to an Automate model AM1 or 427A. Alarm store hooked it up but alarm does not work properly.They are not being very cooperative on fixing the problem. It is probably not wired correctly. its an alarm add-on to the factory keyless system.

Replies:

Posted By: Teken
Date Posted: September 28, 2004 at 12:11 PM

https://www.directechs.com/guides/manuals/ig/automate/N427A_12-03.pdf

Regards

EVIL Teken . . .

Posted By: osbaldo
Date Posted: September 28, 2004 at 12:45 PM

thanks Teken

Posted By: Teken
Date Posted: September 28, 2004 at 3:18 PM

Please take your time to fully understand how everything will interface with your vehicle. No matter what you do, please varify each potential contact point with your DMM, and follow the reference material as how to do so.

WOOD CUTTER: Measure twice, cut once.

Regards

EVIL Teken . . .

Print Page | Close Window