clifford rsx 3.5 help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39947
Printed Date: October 31, 2024 at 6:41 PM
Topic: clifford rsx 3.5 help
Posted By: Heatw
Subject: clifford rsx 3.5 help
Date Posted: September 28, 2004 at 7:47 PM
well, this is my frist time trying to install this perticular alarm and i'm stuped on onew thing.. everything seems to be working like it chirps, it will trigger when i open doors etc and due to shock.. but the icons on the remote don't change, even when i press lock is says unlocked even thogh the alrm is now active? what didn't i do?
Replies:
Posted By: Javelin3o4
Date Posted: September 28, 2004 at 11:55 PM
is this a new alarm install or did you swap the brain from an older DEI alarm? I had a Matrix 2 alarm system and swapped just the brains with my 3.5 and had the same issue, the problem was the antenna cable, even though they look the same the older style one wont work, replaced the cable and it worked.
Posted By: Heatw
Date Posted: October 06, 2004 at 8:58 PM
nope this was a new install.. but semms checking the antenna is in order.. but it does properly recive and execute commands issued by the remote.. but i don't get any status updates on the remote. like if i press lock the car arms and it's functional it just doesn't change to locked on the remote. it's like the remote isn't getting the infromation or it's jsut ignoring it
|