Print Page | Close Window

2000 Monte Carlo OEM disarm- HELP!

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39968
Printed Date: May 29, 2024 at 1:57 AM


Topic: 2000 Monte Carlo OEM disarm- HELP!

Posted By: MrFleming007
Subject: 2000 Monte Carlo OEM disarm- HELP!
Date Posted: September 28, 2004 at 11:54 PM

Hey guys- heres what I've got. My wifes car is a 200 Monte Carlo. The  alarm install is pretty straightforeward, but I have one question that I'd like to get some help with.  She has a habit of hitting the lock button on the door when she is getting out of hte car, and then locking it again via remote. I'm pretty sure with the alarm installed this will create an issue of the factory alarm going off when she tries to get back in without using the factory transmitter (hope this makes sense). What kind of a pulse am I going to have to make the alarm send to the factory disarm wire to disarm the factory alarm?

Also, while I'm at it, on this one wire lock/ unlock system, how to I accomplish sequential dorr locks? Thanks in advance for your help!

-Owen




Replies:

Posted By: hagmanti
Date Posted: September 29, 2004 at 12:34 AM
From 2000 Chevrolet Monte Carlo Alarm Information
Factory Disarm | Light Green | Fuse Panel or BCM

   Me



Posted By: hagmanti
Date Posted: September 29, 2004 at 12:36 AM
Sequential door locks-- unlock wire goes into driver's door to run relays that run motors. 2nd unlock wire runs entire unlock system....

Me




Print Page | Close Window