I am about to install a remote starter on 03 Camry with factory alarm. They want the remote starter to integrate with their factory alarm and also be activated via their factory remote. I have installed three alarms with remote start capabilities. I looked at crimestopper but I only see system complete alarm systems. I would greatly appreciate if anyone can give me some recommended systems and the wiring it would entail. Do I need a bypass module?
-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"
Try Micro Start 2001 or OMEGA Comfort Start, Both good products & can use Factory Remotes, but will have to pulse 3 or 4 times Lock or Unlock depending on hook-up. They also come with Remotes
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Yes you would need a bypass module. You can use the PKT from bypass.com
You can integrate the factory alarm by finding the lock and unlock wires in the driver side kick panel that operate with the key in the door. Look for the big harness going down in front of kickpanel, you will find a blue? (-lock), also green (+parklights) and GREEN / WHITE (brakeswitch). In the harness in the bottom there is a blue / YELLOW?(-unlock) and also you might need to find the drivers doorpin RED / black? wire if the car has auto headlights. Run your (-)rearm wire to the drivers door pin wire. It is located next to unlock wire. To test these wires use the key in the door. These lock wires will also bypass the Camry's child safety lock feature. To disarm the factory alarm without unlocking the doors, run your ground when running wire to the keysense wire, don't forget to add a diode to this line, cathode facing the module.Hope i can be of some help. Jim