Print Page | Close Window

pd-175 oil sense wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40101
Printed Date: July 21, 2025 at 10:32 PM


Topic: pd-175 oil sense wire

Posted By: a-better
Subject: pd-175 oil sense wire
Date Posted: October 01, 2004 at 11:39 AM

Looking for the color and location of a wire i can use on a 1998 gmc jimmy for the oil sense wire.  tried the wire ont the alterantor but it doesn't work.

-------------
a-better tint & alarm



Replies:

Posted By: Teken
Date Posted: October 01, 2004 at 6:34 PM
The purpose of this task is to initiate a RS? If so, you may also use one of the injector wires.

Use the one wire that is uncommon, to the rest in the injector bank.

Regards

EVIL Teken . . .



Posted By: auex
Date Posted: October 01, 2004 at 8:58 PM
Nah, you need the damn oil wire, stupid ass phoenix digital. It will be at the ecm or coming directly off of the oil pressure sensor.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window