Print Page | Close Window

Unlock problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40113
Printed Date: May 15, 2025 at 5:14 AM


Topic: Unlock problem

Posted By: jtjnt
Subject: Unlock problem
Date Posted: October 01, 2004 at 4:09 PM

I had a brand new xv791 installed in my 04 trailblazer. Everthing works fine except the door looks. When we reprogram the 445g for no keyless and plug it in to the module it trys to cycle but it only cycles open twice, no lock. Tried two different 445g's with the same problem. Has this happend to anyone else?

The directions for the 445g state to ground from the GREEN/ black to black to reprogram. Plug in to module and it should cycle. Then attach the GREEN/ black to the green of the security system. Since this last connection has already been done I don't know if the reprogram is complete.




Replies:

Posted By: jtjnt
Date Posted: October 02, 2004 at 6:19 AM
nobody with any ideas?


Print Page | Close Window