remote start hookup problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40176
Printed Date: May 13, 2025 at 4:05 AM

Topic: remote start hookup problems

Posted By: petesneeze
Subject: remote start hookup problems
Date Posted: October 02, 2004 at 5:22 PM

Trying to hook up phoenix pd-175 remote starter on 97 Sebring Convertible

Car has pink/black - constant 12v

yellow- starter

ign 1 - blue

ign 2- GREEN/ red

ign 3 (heat/ac) -BLACK/ white

acc (blower) - BLACK/ orange

pd-175 has 3 prewired relays with a blue, yellow, and 2 brown wires. The yellow is power for starter (i get that , yellow to yellow), The 2 brown come off the same relay and the diagram just says "key On". The diagram for the blue wire says "pwr supply wire for a/c or heat - ACC output". How do I connect these and do I need to add more relays?

THANKS MUCH !!!

-------------
pete

Replies:

Posted By: jrilla
Date Posted: October 02, 2004 at 5:47 PM

The two brown wires are the outputs that power the vehicles Ignition wires. Your vehicle has 2 Ignition wires so you need to hook one brown to each. Blue goes to your acc wire.

I have 2 wire diagrams that both show a 97 Sebring Conv. to have the following wire colors:

12v: Pink/Black
Start: Yellow
Ign 1: Dark Blue
Ign 2: BLACK/ Orange
Acc: BLACK/ White

Since there is a discrepancy, just be sure to Test all the wires before making your connection.

-------------
J Rilla

Owner/Installer

Posted By: petesneeze
Date Posted: October 04, 2004 at 11:26 AM

ok ..THANKS A LOT !!!

-------------
pete