Print Page | Close Window

weird problem with Matrix 3.5 remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40188
Printed Date: May 14, 2025 at 7:22 AM


Topic: weird problem with Matrix 3.5 remote

Posted By: supdupa02
Subject: weird problem with Matrix 3.5 remote
Date Posted: October 03, 2004 at 1:35 AM

Hows it going? I have a weird problem with one of my remotes. I have two sets of matrix 3.5 remotes.

Using the the first remote works fine. When I press the unlock button, the car's doors unlock. The doors also unlock when i the ignition is turned off.  No problem with locking the car.

When using the second remote it does not unlock  when I press the unlock button. In order for me to unlock the car's doors i have to quickly press the unlock button twice. When the ignition is turned off, the doors do not unlock like when I am using the first remote. I have no problem with locking the car.

I have tried to reprogram the second remote by removing the battery then putting it back in then using the valet switch to program the remote, but that does not seem to work, unless, I am not programming the remote right (I use the autolearn function to program the remote).

Thanx.




Replies:

Posted By: Teken
Date Posted: October 03, 2004 at 1:09 PM
Delete all transmitters (option 12) and relearn all RC and try it again.

Regards

EVIL Teken . . .



Posted By: Teken
Date Posted: October 03, 2004 at 1:28 PM
Did you install this unit yourself? If so, try the above method first. If the unit was installed and programmed with a bitwritter, the unit may be locked, or programmed for only one remote.

Regards

EVIL Teken . . .


Print Page | Close Window