Resetting My ProStart CT-3300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40227
Printed Date: May 15, 2025 at 5:54 PM

Topic: Resetting My ProStart CT-3300

Posted By: Zilverado
Subject: Resetting My ProStart CT-3300
Date Posted: October 03, 2004 at 7:06 PM

Well, I do seem to have another problem with my ProStart CT-3300. I can?t reset it.

The instructions say to ?Flash? the hood pin and then step on the brake pedal 6 times within 10 seconds. The parklights should then flash 8 times to confirm reset. This is not working.

Can I reset the unit by just unplugging the wiring harness?

-------------
Zilverado,
Backyard Mechanic
1986 Chevy Truck & 1992 Nissan Pathfinder

Replies:

Posted By: Velocity Motors
Date Posted: October 03, 2004 at 9:03 PM

Try disconnecting the main harness. Aside from this, ProStart's are crap. I had the same problem with 3 units a couple of winter's ago and I had to get the customer's to return the CPU's to Canadian Tire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Zilverado
Date Posted: October 04, 2004 at 12:02 PM

Velocity Motors wrote:

...Aside from this, ProStart's are crap. I had the same problem with 3 units a couple of winter's ago and I had to get the customer's to return the CPU's to Canadian Tire.

Now you tell me.... ;-)

-------------
Zilverado,
Backyard Mechanic
1986 Chevy Truck & 1992 Nissan Pathfinder

Print Page | Close Window