Crank time on Phonix Digital PD-175

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40317
Printed Date: May 15, 2025 at 2:35 PM

Topic: Crank time on Phonix Digital PD-175

Posted By: a-better
Subject: Crank time on Phonix Digital PD-175
Date Posted: October 05, 2004 at 9:38 AM

I have installed a PD-175 on a 98 Jimmy using both the alt. filed wire and the oil sensor wire as + inputs (neither show a full 12 volts getting 9 af most) and still get cranktime of 1/2 second too long. Is there a way to fix this or should I yank it and install a tach signal remote start. The customer loves the remotes with the PD-175 or I would have swapped already. Any help?

-------------
a-better tint & alarm

Replies:

Posted By: jkyliej
Date Posted: October 05, 2004 at 1:37 PM

Is there a section in the programming that allows you to set the starter duration time?

-------------
JKJ

Print Page | Close Window