Viper 791xv Remote start on 1998 Maxima

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40330
Printed Date: May 11, 2024 at 7:32 PM

Topic: Viper 791xv Remote start on 1998 Maxima

Posted By: hoops12
Subject: Viper 791xv Remote start on 1998 Maxima
Date Posted: October 05, 2004 at 3:57 PM

Hey guyz, Just purchased a Viper 791xv last week, and was getting it put into my car by an installer. He had everything going right but hwen he came down to the remote start my car would not turn over. He would hit the remote start button and all my car would do is crank and the car wuodl keep revving. I finally spoke to him a few hours after that and he told me that the remote starter was getting 12v of power constant which was not good. He said it was basically like you manually turning the key , letting the car crank for 5-10 seconds. This couild cause gridnig and mess up the car. DId he not isntall it right? or did I get a fualy piece? 12v of constant power not good for the remote starter relay pack??

Someone pls. help me out here.

Replies:

Posted By: DUTCHTOUCH
Date Posted: October 05, 2004 at 10:29 PM

12v on what wire & wire function?

Be more specific ?

Dutch

-------------
First Class M.E.C.P. Certified & 310K Licensed
Electronic Installer

Posted By: snguyen
Date Posted: October 06, 2004 at 11:55 AM

More info the 12Volt would help. Have the proper tach connected?

Posted By: thepencil
Date Posted: October 06, 2004 at 2:13 PM

There are two Starter wires on this car make sure the second starter wire is connected.

STARTER 2 is (RED / BLUE) and is located at IGNITION SWITCH HARNESS.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image