Remote Start makes hard engine shift
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40549
Printed Date: May 09, 2025 at 6:07 AM
Topic: Remote Start makes hard engine shift
Posted By: manrightcheer
Subject: Remote Start makes hard engine shift
Date Posted: October 08, 2004 at 11:13 PM
I had installed a Commando 6000 from asianwolf.com installed on my 96 Tahoe. Everything is good with it other than when I use my remote start and drive it after the remote start the transmission encounters a hard shift. I'm not sure if all remote starters do this or if something may have benn installed wrong. Any iformation will help, so I can tell the people that installed the alarm what maybe the problem so they won't have my truck for days. ------------- CJ ALLDAY
Replies:
Posted By: securinu
Date Posted: October 08, 2004 at 11:55 PM
You need to power up the white wire 12 ga. thru the start cycle. It powers the Trans computer. power it just like an ignition
-------------
Joe O'Byrne
Owner / Installer
Posted By: manrightcheer
Date Posted: October 09, 2004 at 6:03 PM
Is that something I can do or should I take it back to the installation place? If i can do it myself can you tell me the steps to take to get it done, because winter is about to come up and I want to use my remote start and be able to just get in my truck and go opposed to having to turn it off and then start it back up with the key. THANKS MAN ------------- CJ ALLDAY
Posted By: Alpine Guy
Date Posted: October 09, 2004 at 6:43 PM
looks like they missed the 2nd ignition wire, which is essential. Don't use your remote starter until it is fixed. Transmission damage can occur.
-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
|