Print Page | Close Window

Di I need to remove door panels for k/e?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40692
Printed Date: May 14, 2024 at 4:49 AM

Topic: Di I need to remove door panels for k/e?

Posted By: Ringo
Subject: Di I need to remove door panels for k/e?
Date Posted: October 11, 2004 at 3:46 PM

I have a 1990 Bronco full size. It already has power locks. I am installing a keyless entry alarm system.

I am about to install Dynamat throughout the truck. I will be covering both doors with it.

My question is - do I need to remove the door panels and get into the door to hook up to the power locks? Or is the connection made elsewhere? The Dynamat is expensive and I do not want to have to tear it off later to install the alarm. Both of my door lock actuators have been replaced so I should not have to get back into the door for a long time.

Thanks!

-------------
1990 Ford Bronco XLT Alpine/Kenwood XM system 2 amps 5 speakers Keyless entry remote start soon to have DVD player

2001 Harley FXSTS

Replies:

Posted By: zargon
Date Posted: October 11, 2004 at 4:08 PM

the connection will be made inside the car,so go ahead and dynamat.

-------------
zargon ruler of estranorth

Posted By: Ringo
Date Posted: October 11, 2004 at 4:20 PM

Thanks!

-------------
1990 Ford Bronco XLT Alpine/Kenwood XM system 2 amps 5 speakers Keyless entry remote start soon to have DVD player

2001 Harley FXSTS

Print Page | Close Window