530t run four windows up only?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40760
Printed Date: May 22, 2024 at 8:55 PM
Topic: 530t run four windows up only?
Posted By: camarob4c1
Subject: 530t run four windows up only?
Date Posted: October 12, 2004 at 6:26 PM
draasch & m012v have helped me greatly. Now I am looking in to adding the DEI 530t window module to the Crime Guard 745i2 in my daughters 95 mustang. I bought the 530t to roll up four windows when the system arms. Now I am hearing that it will only operate two windows. I thought that the 530t would work two windows in both directions, or four windows in one direction. I originally bought two of them to work all four windows both up and down, but have decided that I just want four windows to roll up when the system arms. I also have two of the au-93 units from Crime Guard, but was told they will not do want I am wanting. Anyone? Tom
Replies:
Posted By: Teken
Date Posted: October 12, 2004 at 6:54 PM
I dont understand what you are asking. But you have basicly answered your own Q.
If you want 4 windows to go up & down, you need two 530T's
If you can live with only 4 windows going up, then one 530T will do the job. But it will not do both motions at once, for (4) windows.
Regards
EVIL Teken . . .
Posted By: camarob4c1
Date Posted: October 12, 2004 at 7:42 PM
Evil & all others, I am wanting to roll four windows up, but from what I have been told, the 530t will not do this. The papers with the 530t, on page 2, show a wiring diagram for two windows up and down, no where in the booklet does it mention 4 windows in one direction. So, will a 530t do 4 windows in one direction? If so, how do I wire it to a 95 mustang? Tom
Posted By: draasch
Date Posted: October 13, 2004 at 7:22 AM
Teken, correct me if im wrong,
but if tom takes the down motor wires and the down switch wires and he hooks them up to the 2 rear windows up wires, will it do what he is looking for????? ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: camarob4c1
Date Posted: October 13, 2004 at 5:31 PM
Guys, The weekend is quickly approaching. If at all possible I would like to be able to complete the installation this weekend and GET THIS CAR OUT OF MY GARAGE. Will the 530t operate all four windows up? If so, how do I wire it? Thanks, Tom
Posted By: camarob4c1
Date Posted: October 14, 2004 at 5:41 PM
I have scanned the 530t instructions in to a file. If anyone else would like to see it, to help me figure this, please let me know and I will gladly email to you. Tom
Posted By: draasch
Date Posted: October 14, 2004 at 5:44 PM
go ahead and e-mail them to me tom.......... ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: TimothyCox
Date Posted: November 08, 2004 at 1:47 PM
I know this is an old thread, But worth updating. The simple answer is NO, The 530T will only automate 2 windows, Period. There probably is some funky way to "hokey" it to work, but the reality is this module provides neg(-) to one motor lead while providing pos(+) to the other (and reversing polarity to run the window down) It was not designed to operate 4 windows in the same direction. If all you want is windows up with arm, this is NOT the best unit to buy, It offers wonderful one-touch, 2 direction automation, But you could simply use 2 cheapo roll-ups for what you want. Don't think of the 530t as "4 separate windows controllers" it's not, It's 2 bi-directional window controls. My 2 cents.
|