Print Page | Close Window

clifford flashing icon ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40866
Printed Date: May 11, 2024 at 4:34 AM


Topic: clifford flashing icon ?

Posted By: webstar
Subject: clifford flashing icon ?
Date Posted: October 14, 2004 at 11:31 AM

Hi I  am trying to install a flashing clifford icon that should flash when the alarm is armed but when i connect to the armed out put it triggers the proximity sensor and warn away alert.

How do i install this any help would be great.



-------------
webs



Replies:

Posted By: Teken
Date Posted: October 14, 2004 at 3:47 PM
You need to install a one ampere diode in series to that *ground when armed* output.

Regards

EVIL Teken . . .


Print Page | Close Window