Print Page | Close Window

2wss remote question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40881
Printed Date: May 16, 2025 at 6:27 PM


Topic: 2wss remote question

Posted By: eightballrj
Subject: 2wss remote question
Date Posted: October 14, 2004 at 3:47 PM

I just bought a 2wss-as and it just came in. I pulled everything out of the box and was wondering when the display is supposed to "glow". Should it be glowing as soon as it cuts on or does it have to be activated some how when I istall the alarm. I just wanted to make sure everything is working correctly. Thanks guys!! Oh, and I am thinking of trying to install this thing myself into a 1995 BMW M3 and I was wondering if you all knew of a good place for wiring diagrams.

Richard Jackson




Replies:

Posted By: opaque
Date Posted: October 14, 2004 at 9:40 PM

are you saying a 2 way autostart with LCD screen and are you asking about the LED on the antenna?



-------------
"NEVER THE MASTER ALWAYS THE STUDENT"



Posted By: Velocity Motors
Date Posted: October 15, 2004 at 9:05 AM
The backlight only goes on when you press a button or when the alarm is sounding or you have the 1st stage impact go off .

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window