Print Page | Close Window

clifford 3.5 question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40973
Printed Date: May 11, 2025 at 9:56 AM


Topic: clifford 3.5 question

Posted By: fortillian
Subject: clifford 3.5 question
Date Posted: October 15, 2004 at 7:28 PM

I have an advantguard 4 and im looking to upgrand to the clifford 3.5 2-way transponder. I am wondering what from my current alarm i can keep. The dual zone proximity sensor can only be adjusted by the alarm itself so im not sure if i can use that. Can i use the self powered smart siren? THanks



Replies:

Posted By: extreme1
Date Posted: October 15, 2004 at 7:44 PM
umm, that is a signifigant downgrade my friend.

The only thing you get is 2 way

None of the avantgard (or any G4 clifford) parts will work with the DEI clifford stuff. SO the answer is you can keep nothing from your current alarm.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta


Print Page | Close Window