Viper Installed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40985
Printed Date: May 17, 2024 at 8:00 PM
Topic: Viper Installed
Posted By: The Rock
Subject: Viper Installed
Date Posted: October 16, 2004 at 9:08 AM
I just had my viper 791xv pro. installed, and they did a good job, I love it, but the thing that I don't get is, I had them install a prox. radar sensor, and it works, but only once you hit it hard. Is this how they work, or should I go back and tell them to adjust it? Thanks
Replies:
Posted By: swamprat323
Date Posted: October 16, 2004 at 9:37 AM
Take it back or look for it your self.Were they mounted it at not sure. it just a small screwdrive to adj it.
Posted By: tbirdman74
Date Posted: October 16, 2004 at 9:56 AM
BTW A proximity sensor should not require hitting the vehicle, it should pick up your body movement as you approach the vehicle. A shock sensor requires hitting the car. Not sure which you have, but something seems amiss with the install. Take it back and have them work it over till they get it right.
-------------
If it don't fit, Force it.
If it breaks, You needed a new one anyway!
Posted By: The Rock
Date Posted: October 16, 2004 at 11:08 AM
Ok, Cool Thanks guys, I wanted a proximity sensor, so I will take it back. thanks
Posted By: The Rock
Date Posted: October 16, 2004 at 11:40 AM
i just called them back and they told me about that screwdrive, and I poped the hood and it's right there, just under the hood, little screw that is connected to some kind of wire, could that be it. thanks
|