99 f250

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41000
Printed Date: May 09, 2025 at 6:52 PM

Topic: 99 f250

Posted By: fireresqdog
Subject: 99 f250
Date Posted: October 16, 2004 at 2:08 PM

Hey folks i have a 1999 ford F250 with a Rattler remote start. ON my remoth there is a AUX buton and i was interested in making this button be able to run some step lights for my truck. can anyone tell me if this can be done and how?

chris

Replies:

Posted By: mo12v
Date Posted: October 16, 2004 at 4:08 PM

R U wanting them to flash or stay on for a time?

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: fireresqdog
Date Posted: October 16, 2004 at 5:17 PM

i would like them to stay on for an amount of time, like 1 min. or so so my wife can see when she goes to get in the truck

chris

Posted By: draasch
Date Posted: October 16, 2004 at 7:01 PM

you should be able to do it with a latching relay.....im not sure how the rattler is setup...i dont use that brand....do the parking lights come on when you remote start the truck????

or you can use a relay to power up the lights anytime you remote start the truck....

unrelated question:
are you on the job??
L2294 here

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: fireresqdog
Date Posted: October 17, 2004 at 10:50 AM

the parking lights flash on and off when i remote start then they go off when i step on the brake.

Unrelated..................yes im on the Job in NJ. Local F-114

Posted By: Teken
Date Posted: October 17, 2004 at 2:43 PM

What model Rattler is this?

Regards

EVIL Teken . . .

Posted By: fireresqdog
Date Posted: October 17, 2004 at 7:44 PM

its the Rattler 369D Remote Start / Keyless Entry System on a 99F250 this would be great if someone could help me out.

chris

Posted By: dBDevil
Date Posted: October 17, 2004 at 10:56 PM

Read over your instruction manual. You should be able to program the aux button/white and blue wire from the brain to latching. Meaning the wire goes to ground when you hit the button, and turns off when you hit it again. A relay will be needed to turn on something with a high amp draw like lights. You would also have to turn off the circuit everytime, otherwise it would stay on indefinately.