Power windows Tahoe 1998

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41023
Printed Date: May 15, 2025 at 5:50 AM

Topic: Power windows Tahoe 1998

Posted By: jorgefdz
Subject: Power windows Tahoe 1998
Date Posted: October 16, 2004 at 7:47 PM

Hi everybody:
I have a FAI-4WM windos module, and I need help to wire up to a tahoe 1998. I want to know if I need to cut the wires. The module is wired in series with the motor or what?

I have 2 windows modules 1 for windows roll up and the other one for roll down.

please someone help me.
thank you.

-------------
J.F.L.L.

Replies:

Posted By: mo12v
Date Posted: October 16, 2004 at 8:07 PM

Yes U have to cut wires and wire them as per your units Instructions

Reversal Rest At Ground Power Window Circuit

Window Up	Driver\ D BLUE Pass\ L BLUE DriverR\ D GREEN PassR\ L GREEN @ MAIN SWITCH
Window Down	Driver/ BROWN Pass/ TAN DriverR/ VIOLET PassR/ VIOLET

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: jorgefdz
Date Posted: October 16, 2004 at 8:26 PM

Hi mo12v:

If all this is on main switch, Why have I heard that we need to wire the motor's wire to every door? is it correct? or we can wire it only from drivers door?
thank you very much

-------------
J.F.L.L.

Posted By: mo12v
Date Posted: October 16, 2004 at 9:46 PM

U can wire from Drivers door

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Print Page | Close Window