Print Page | Close Window

disarm and arm both lock doors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41088
Printed Date: October 31, 2024 at 6:39 PM


Topic: disarm and arm both lock doors

Posted By: bigt_45
Subject: disarm and arm both lock doors
Date Posted: October 17, 2004 at 9:06 PM

I am connecting the arm and disarm feature from a Code Start alarm on a 95 integra.  when I hook the negative pulse wires up separately (-lock and not -unlock or -unlock and not -lock) it works the way it should.  when i  hook the lock wire up and the unlock wire up at the same time, they both lock the doors.  The arm and disarm are hooked up to two separate wires in the drivers footwell and my metering shows them to be the correct wires.  I am lost on why they act differently when both are connected.




Replies:

Posted By: mo12v
Date Posted: October 18, 2004 at 6:50 PM

Have U metered the Factory wiresto make sure?

the Ground Pulse from your Code Start may not be strong enough to do both functions & U may need to use 2 Relays for Ground Pulse

Power LockBLACK/ WHITELARGER OF 2 GRAY CONNECTORS IN
Power UnlockBLACK/ REDDR. KICK PANEL BEHIND CRUISE CONTROL
Negative Pulse Door Lock.



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.





Print Page | Close Window