C3000 computstar wiring relay
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41114
Printed Date: May 22, 2024 at 8:57 PM
Topic: C3000 computstar wiring relay
Posted By: woeful
Subject: C3000 computstar wiring relay
Date Posted: October 18, 2004 at 10:48 AM
I am a newbie trying to install this compustar 900 2way to my 97 accord, I have a problem with the 2 relay on the primary harness, 1 of the relay have a yellow wire and a yellow black wire, where do I connect these to? and the other relay have a purple wire and a blue wire. Also, I need to find the tach sensing wire, I think it's at the distributor, but i don't know where the distributor at, thanks for the help.
Replies:
Posted By: Patel
Date Posted: October 18, 2004 at 10:59 AM
1)the relay with the two yellow wires are for a starter kill, cut ur start wires on ur accord (blk/wht) and connect the yellow to the starter side and the yellow/blk to the key side.
2) the second relay w/ the thick blue and the thin purple is for a second IGN/ACC etc. in ur case u don't need it.
3) as for the tach it is at distributor, its blue wire in a two pin connector, i think the other is a tan ( if i remmember correctly)
|