01’ nissan altima trunk release
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41156
Printed Date: May 08, 2025 at 7:29 AM
Topic: 01’ nissan altima trunk release
Posted By: mpathy
Subject: 01’ nissan altima trunk release
Date Posted: October 18, 2004 at 5:15 PM
Is there a way to get thr trunk on a 01' altima to pop thru aftermarket remote . I am installing a DTI alarm/rs and want to connect my trunk. I can pop my trunk thru my factory but I have a a manual lever as well. Any help is great ..... Thank you in advance
Replies:
Posted By: SEXIFIED
Date Posted: October 18, 2004 at 5:33 PM
so long as you have the (-)from the bcm. usually it is the RED / black and if the switch is on the drivers door you will need to run your own wires into the door. you can get the factory alarm to arm/disarm,re-arm,as well as lock,and un-lock the doors,as long as you go directly to the factory window and lock switches. if you use a long enough pulse on the lock wire you can also automatically have the windows roll up and vice/versa on the un-lock.
Posted By: mpathy
Date Posted: October 18, 2004 at 5:58 PM
Thanks for that info . My issue is that I have a lift lever for my trunk release. I am thingkinh that there may be a motor ony to pop the trunk with the remote. I am not sure .. Hvae you seen this before?
Posted By: mo12v
Date Posted: October 18, 2004 at 5:59 PM
This is what I have: | Trunk Release | ORANGE / BLACK (-) | AT "SMART ENTRANCE CONTROL UNIT" * |
* "Smart Entrance Control Timer" Is A BLUE Module Located Behind The Driver Dash To The Right Of The Steering Column. ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mpathy
Date Posted: October 18, 2004 at 6:00 PM
Thanks for that info .. My thing is that I have a lift lever for my trunk release inside. I don't have a button on the door.. Have you seen before? What do I do ?
Posted By: mo12v
Date Posted: October 18, 2004 at 6:11 PM
OOPS..............WRONG info
If U have JUST a Levr & no Electric solinoid / motor in trunk U may S.O. L.
There R Universal Trunk Releases available, but it may be fun to install
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mo12v
Date Posted: October 18, 2004 at 6:11 PM
OOPS..............WRONG info
If U have JUST a Lever & no Electric solinoid / motor in trunk U may S.O. L.
There R Universal Trunk Releases available, but it may be fun to install
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mpathy
Date Posted: October 18, 2004 at 6:16 PM
Sorry for the double post.... Thanks all for the help.
Posted By: SEXIFIED
Date Posted: October 19, 2004 at 7:44 AM
have to tried going directly to the trunk motor? you might be able to do 5 wire trunk release, but make sure when you try that, you use a fuse holder, if it's not 5 wire it may feedback to the module......(may be an expensive fix)otherwise just install a trunk release solonoid.
|