2002 Chevy Silverado Alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41175
Printed Date: May 29, 2024 at 4:25 AM

Topic: 2002 Chevy Silverado Alarm

Posted By: Georgeous
Subject: 2002 Chevy Silverado Alarm
Date Posted: October 18, 2004 at 7:40 PM

i have a aftermarket keyless entry that i am hooking up to my 02 silverado i am wanting to know the alarms arm and disarm wire color and location Thank you

George

Replies:

Posted By: Teken
Date Posted: October 18, 2004 at 7:55 PM

Factory disarm is located at the BCM, and is light green.

The factory arm is tan in color and can be armed by grounding the drivers door pin while locking the door, it will also shut down the RAP system.

Regards

EVIL Teken . . .

Posted By: Georgeous
Date Posted: October 18, 2004 at 8:04 PM

okay now i feel dumb... where is the drivers door pin located

Posted By: Georgeous
Date Posted: October 18, 2004 at 8:05 PM

okay now i feel dumb... where is the drivers door pin located?

Posted By: Teken
Date Posted: October 18, 2004 at 8:11 PM

The door pin is located at the BCM which is at the steering wheel column, which is a brown plug. The door pin color is tan and light blue in color.

Dont feel stupid for asking a question, only feel stupid for interfacing into wiring which you do not know what it is.

Everyone learns by doing.

Regards

EVIL Teken . . .

Print Page | Close Window