03 sierra
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41245
Printed Date: May 03, 2024 at 8:40 AM
Topic: 03 sierra
Posted By: partyguy
Subject: 03 sierra
Date Posted: October 19, 2004 at 5:44 PM
got a question i'm still fighting with my 2003 gmc sierra it only starts sometimes its something to do with e factory alarm i think. i hooked up the disarm wire but it only seems to start with the doors unlocked do i need to hook up the keyless on my stater to solve this problem?
Replies:
Posted By: SEXIFIED
Date Posted: October 19, 2004 at 6:05 PM
o.k, tell me what you have installed into the truck.
i need this info before i can tell you what to fix.
Posted By: partyguy
Date Posted: October 19, 2004 at 6:14 PM
i got a prostart r/s installed with the passlock 2 feature i did not hook up the keyless but chose to use the factory one instead i also hooked up the green disarm wire in the driver door. like i said the starter works perfect but only if the doors are unlocked.
Posted By: partyguy
Date Posted: October 19, 2004 at 8:34 PM
if anyone can help i'm gonna take one last try at it today.
Thanks
Posted By: partyguy
Date Posted: October 19, 2004 at 8:38 PM
actually one more thing what is the purpose of the key sense wire i have never had to use it until maybe now any help??
Posted By: SEXIFIED
Date Posted: October 19, 2004 at 9:19 PM
i can't say that i have ever heard of that problem before.
are you sur ethat you don't have a wait-to-start wire grounding out with the domelight or something like that?
Posted By: partyguy
Date Posted: October 19, 2004 at 9:24 PM
no not at all no domelight wire is hoked up just a straight start thats why i'm wonderin if i have to do the keyless to get it to work
Posted By: partyguy
Date Posted: October 19, 2004 at 9:26 PM
however i did wire the parking lights up to a positive wire cause i found one would this make a difference??
Posted By: mo12v
Date Posted: October 19, 2004 at 9:34 PM
Have U checked to see if U have output from DisArm wire when U Remote Start?
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: partyguy
Date Posted: October 20, 2004 at 6:38 AM
that was what i was thinkin gonna try it today i hope the unit isn't bad its new much appreciated for the info MO
Posted By: sparkie
Date Posted: October 20, 2004 at 2:54 PM
Check the programming for the Prostart. Most of them don't pulse the disarm wire with default programming. You should program all modes and functions when these remote starters are used. Don't forget to program the tach too. Confirm that you have also tapped into the correct wire inside the drivers door for the disarm circuit. I would suggest that you purchase a keyless/alarm data interface for this truck. They are worth the money and conveniece. They hook up with only a few wires inside the dash and control the locks and factory alarm.
-------------
sparky
|