Print Page | Close Window

1998 Mountaineer Power Door Lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41262
Printed Date: May 16, 2024 at 7:16 AM


Topic: 1998 Mountaineer Power Door Lock

Posted By: kevincrowley
Subject: 1998 Mountaineer Power Door Lock
Date Posted: October 19, 2004 at 9:39 PM

The drivers door power lock (factory) stopped working recently.  Since all the other door locks work properly both with the remote and drivers door switch I assumed the actuator had gone bad. I replaced the actuator and also a switch on the door latch but the problem still persists.  I do not see any other obvious problems (e.g.; rusted connectors, split wires)

Would appreciate any suggestions on what could be causing this problem and any trouble shooting tips. 

Thanks in advanced for any tips/advice.



-------------
Kevin Crowley



Replies:

Posted By: mo12v
Date Posted: October 19, 2004 at 9:44 PM
Did U meter the Door Lock wires going to actuator?

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window