door locking problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41276
Printed Date: May 10, 2025 at 9:41 AM
Topic: door locking problem
Posted By: elserpiente
Subject: door locking problem
Date Posted: October 20, 2004 at 3:00 AM
Hi, I installed alarms in two integras, one a 95, the other a 96, both with crimestopper systems. They both worked perfect for about a week and then the lock function on the remote stopped working, the locks still work manually from the doors though. I checked the lock wire and it was still properly connected. I took one to a install shop and the guy said it was a bad control unit, but I dont believe that. I appreciate any help you could give me.
Replies:
Posted By: mo12v
Date Posted: October 20, 2004 at 8:31 AM
U can check, by metering your Lock / UNLock wires from module.
It was probably hooked direct to the Factory Vehicles Lock / UNLock wires and ( could have ) effected the RS / Alarm Module.
U may need Relays
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
|