python 881xp
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41308
Printed Date: May 07, 2025 at 9:07 PM
Topic: python 881xp
Posted By: 98BLACKF150
Subject: python 881xp
Date Posted: October 20, 2004 at 3:16 PM
I have a python 881xp with remote start and I need to know what to hook up the (-) ground when armed output. Where the hell do I hook this wire up to. I know you cant just ground it out to the chassis because it says the ground is only when the system is armed. Next is the (-) remote start activation input. No idea. Both of those wire are from the primary harness. I am hooking up remote start with the alarm. No roll up windows or anything else like that. Its on a a 98 F150. Thanks
Replies:
Posted By: swamprat323
Date Posted: October 20, 2004 at 4:58 PM
Dont worrie about those 2. the ground when armed is for a starter kill relay, but that built in the realy harness. activation input u dont need either that you can hook up to a button that will act like the button on the remote to RS.
|