Print Page | Close Window

Pulse on shutdown to turn off RAP?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41375
Printed Date: May 07, 2024 at 6:38 PM


Topic: Pulse on shutdown to turn off RAP?

Posted By: naamanf
Subject: Pulse on shutdown to turn off RAP?
Date Posted: October 21, 2004 at 6:54 PM

I am installing a Cliffiord Avantguard 5 into a 2003 Yukon.  I want to disable the RAP on shutdown.  I would like to have a pulse on shutdown to one of the door triggers.  The AV 5 dosen't seem to have a pulse on shutdown.  Any ideas?



Replies:

Posted By: larkster
Date Posted: October 21, 2004 at 7:01 PM

it doesnt have a rearm output?





Posted By: naamanf
Date Posted: October 21, 2004 at 7:27 PM

It does not.  At least not as far as I can tell. Maybe there is an option with the Cliffnet Pro software but I don't have it yet. Any ideas?





Posted By: kgerry
Date Posted: October 22, 2004 at 9:42 AM
USE A dei PULSE GENERATOR

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: jrilla
Date Posted: October 23, 2004 at 9:04 AM
Sometimes you can use the lock wire to pulse the door trigger and program the unit to lock after shutdown.

-------------
J Rilla

Owner/Installer




Posted By: jrilla
Date Posted: October 23, 2004 at 9:07 AM
Sometimes you can use the lock wire (split and diode isolate) to pulse the door trigger and program the unit to lock after shutdown.

-------------
J Rilla

Owner/Installer




Posted By: daniel2002p
Date Posted: October 23, 2004 at 6:14 PM
that alarm should have a arm wire, just hook up a relay so it gives ground to the drivers door pin when disarmed and program the alarm to rearm after shutdown.

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!





Print Page | Close Window