Is it Possible?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41385
Printed Date: August 21, 2025 at 2:36 PM
Topic: Is it Possible?
Posted By: Sebastian018
Subject: Is it Possible?
Date Posted: October 21, 2004 at 9:40 PM
Hi, I have a Clifford RSX 3.5 matrix. I want to know if this possible, I want to install a LED in the DOOR HANDLE (4 doors) So everytime I press the alarm remote to disarm the alarm the LED turns on, and stay on for a couple of seconds. Is it possible.??
Replies:
Posted By: daniel2002p
Date Posted: October 21, 2004 at 11:38 PM
the only way I can think of is to get four 12volt led's and hook them up to the domelight output on your alarm through a relay, but then they would stay on for 30 seconds.
-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: auex
Date Posted: October 21, 2004 at 11:43 PM
You could play around with some polar caps to achieve this, but it will have adverse reactions to the normal pulse.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: Sebastian018
Date Posted: October 22, 2004 at 1:04 AM
I will play around tomorrow. Trying differents ways...
-------------
Posted By: markcars
Date Posted: October 22, 2004 at 11:08 AM
Seems like a cool idea.
Where exactly do you plan to put the LEDs for the door handles? Do you have to drill holes in the door handles to put the LEDs?
|