Print Page | Close Window

04 Envoy XUV V8 bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41440
Printed Date: May 20, 2024 at 4:31 AM


Topic: 04 Envoy XUV V8 bypass

Posted By: schmeide
Subject: 04 Envoy XUV V8 bypass
Date Posted: October 22, 2004 at 4:16 PM

I am installing an avital 4400 (remote start & alarm) in an 04 envoy XUV V8 factory L/UL next week and I wondering which bypass I should get.   I have heard that some installers are running into problems with the 04 envoy/trailblazers with the v8s.

I was also planning on running the rear window down off of the aux line, anyone have a wire diagram for that one?

Many Thanks

Jason




Replies:

Posted By: mo12v
Date Posted: October 22, 2004 at 4:24 PM
I  use DEI, OMEGA, & Peripheral for DATABuss Interfaces and I DO NOT like Peripheral, because of their Tech Service & problems encountered
OMEGA # DB-PASS-23  DATABuss ByPass
OR
OMEGA # DB-GMDL-BP Combo DATABuss ByPass & Door Locks

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: snguyen
Date Posted: October 22, 2004 at 10:13 PM

You can use the GMBP - GM Passkey 3 & Passlock 2 Override Interface from bypass.com

Data Bus Interface: GM Passkey 3 Transponder Immobilizer Overrride & GM Passlock 2 Immobilizer Override via data bus. NKR-No Key Required. The GM-BP is a "3 in 1" solution equivalent to using the PKG5 & PKG3 & PLDATA .


Print Page | Close Window