power door locks on 2001 miata?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41441
Printed Date: May 08, 2024 at 10:21 PM

Topic: power door locks on 2001 miata?

Posted By: sikassscivic
Subject: power door locks on 2001 miata?
Date Posted: October 22, 2004 at 4:21 PM

i just took the door panels off to find a nightmare.how exactly do i install motors on these locks,they are all cable driven.

Replies:

Posted By: sikassscivic
Date Posted: October 23, 2004 at 8:08 AM

Posted By: audiopro111
Date Posted: October 26, 2004 at 12:40 AM

u can't i'm sure someone has done it at one point in time, but if i were u i wouldn't it just going to become a haedache.

-------------
AudioPro111

Posted By: extreme1
Date Posted: October 26, 2004 at 1:04 AM

best way is to drill a 1/8" hole into the lever. It works great on the focus/cougar.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Posted By: sikassscivic
Date Posted: October 26, 2004 at 12:52 PM

well,what i ende up doing was cutting a corner off the bracket in the back ,by the cable,attaching the clip to the lever and mounting motor in the behing the lever,worked pretty good actually.

Print Page | Close Window