e bay cheapo lcd alarm tach wire?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41493
Printed Date: May 08, 2024 at 3:29 PM
Topic: e bay cheapo lcd alarm tach wire?
Posted By: sikassscivic
Subject: e bay cheapo lcd alarm tach wire?
Date Posted: October 23, 2004 at 2:26 PM
i think its a fm 2000 or something close to that.it dosnt have a tach wire listed in the crapy instructions.it just has a strange yellow wire coming from the side that is about 15 foot long.in the crapy directions it says its a 12 volt out put wire,i metered it and i dont get any thing from it.could this be my tach wire??its not in the harness with all the other wires,it comes straight from the case and is yellow and very long.
Replies:
Posted By: Teken
Date Posted: October 23, 2004 at 2:47 PM
sikassscivic wrote:
i think its a fm 2000 or something close to that.
Leave a direct URL link for the product, or confirm the name of the unit.
Getting help starts with you, supplying the proper information.
No information = No answers / Half Aszz Guess's
Regards
EVIL Teken . . .
Posted By: mo12v
Date Posted: October 23, 2004 at 3:23 PM
I've been known to : No information = No answers / Half Aszz Guess's
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: sikassscivic
Date Posted: October 23, 2004 at 4:18 PM
https://cgi.aol.ebay.com/ebaymotors/dll?ViewItem&item=7923655445&category=33721 a link to the auction,its called a 2000 f/s,i have no ideal who actually made it.it doesnt say any where on the box.
Posted By: Velocity Motors
Date Posted: October 23, 2004 at 4:32 PM
What are some other wires in the harness ? The YELLOW wire is an output which would not be for the tach signal. You need an INPUT for the tach signal for remote start.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: sikassscivic
Date Posted: October 23, 2004 at 4:37 PM
the instructions for this thing really suck.all the other wires are basic,just usual stuff,but no tach wire,no ground when armed wire and there is a jumper on the brain,but no where in the directions does it say what that jumper is for??
Posted By: Scott35
Date Posted: October 23, 2004 at 5:10 PM
That wire is probably just like the Phoenix digital, needs to see +12v before it will crank.
-------------
Tacomacrew
Posted By: sikassscivic
Date Posted: October 23, 2004 at 5:25 PM
the car cranks,it just lets the starter go for a few seconds longer than i like,then shuts off after a 20-25 seconds.like its waiting on a tch signal,and because it dosnt see it,it shuts off,the dick i bought it from said he just sells them and has never installed on,yeepee!!
Posted By: mo12v
Date Posted: October 23, 2004 at 6:10 PM
Is there a FCC number on the unit?
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: daniel2002p
Date Posted: October 23, 2004 at 6:21 PM
this is probably one of those units that will stop cranking when the particular wire sees a 12v signal.
-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: sikassscivic
Date Posted: October 23, 2004 at 6:46 PM
mo12v] wrote:
s there a FCC number on the unit?
no
|