Blue led scanner

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41526
Printed Date: May 07, 2025 at 9:44 AM

Topic: Blue led scanner

Posted By: BIkER1
Subject: Blue led scanner
Date Posted: October 23, 2004 at 11:24 PM

I bought a blue led scanner and I would like to install it on my truck.But I don't have the owner manual.I would like to know on wich fuse in the block fuses I plug the wire(.I have a red wire and a black wire).I want to install this scanner till I have my alarm system.I have number on fuses but I don't know wich fuses is for.Because I don't have diagram for the fuses.

The truck is a Ford F150 xlt 1997 full equip.

Thank You ,

for your help.

-------------
LIVE TO RIDE

Replies:

Posted By: italnpimp59
Date Posted: October 24, 2004 at 12:59 AM

any fuse in the fuse box that is a constant 12v goes to the red wire, and ground the black wire. or if you want, tap into one of the yellow wires in the igniton harness..they are constant 12v

-------------

Posted By: BIkER1
Date Posted: October 24, 2004 at 7:05 AM

Thank You

-------------
LIVE TO RIDE

Print Page | Close Window