clutch bypass for r/s on ’01 chev. truck

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41625
Printed Date: May 14, 2025 at 2:08 PM

Topic: clutch bypass for r/s on ’01 chev. truck

Posted By: SEXIFIED
Subject: clutch bypass for r/s on ’01 chev. truck
Date Posted: October 25, 2004 at 2:22 PM

i am installing a compustar 1way am system on my truck and wonder if anyone can tell me or show me the correct way to trigger the clutch so that the truck will start.

there are 4 wires in the plug at the clutch switch near the firewall.

any help would be great.

Replies:

Posted By: Velocity Motors
Date Posted: October 26, 2004 at 9:26 AM

First you have to determine which system you have. Use this diagram to help you:

Negative Clutch Bypass Circuit

Positive Clutch Bypass Circuit

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: riceman
Date Posted: October 26, 2004 at 11:57 AM

If i remember correctely its one of Velocity Motors metention methods plus you have to test the wires ,two of those wires when the clutch is depressed send a starter signal through and the other two wires send either a positive or negative signal through when clutch is depressed you just have to depulicate it with relays. 87 on relay gets starter signal from side that get's the signal when clutch is not pressed, n is cranked, 30 out n tapped into the side that gets the starter signal when clutch is depressed ,tap 87 to 86 on relay, 85 goes to your negative status output of R.S hope that helps.

Posted By: mo12v
Date Posted: October 26, 2004 at 3:22 PM

U may want to add a Peripheral # NSS Neutral Safety ByPass also
RS has to have Stop & Go type feature

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.